|
Post by johnfcbn44dx on Aug 13, 2021 0:04:07 GMT
This file has exported a little better I hope...onto side panels and tail cowl next...
|
|
|
Post by johnfcbn44dx on Aug 16, 2021 20:53:33 GMT
Getting close to a printable version hopefully for AVK-V, I was testing the export to PDF, now I have to go back and lighten each one by the same factor (Thanks for the pics) These are modified to be printable onto white...
|
|
|
Post by andy1kenobe on Aug 19, 2021 12:44:54 GMT
|
|
|
Post by johnfcbn44dx on Aug 19, 2021 16:52:19 GMT
Looking at those pics, I think I may have to increase the width of the white band that goes round the tank stripe, maybe slightly thicker another mm or two, other than that I think I'm happy with the files I've made-up. Now it is getting them exported consistently from the software they are in, to PDF for printing, at the correct colour temperature/brightness, a common problem I'm finding on Google search, nearly sorted it though.
|
|
|
Post by andy1kenobe on Aug 19, 2021 21:18:19 GMT
|
|
|
Post by johnfcbn44dx on Aug 21, 2021 13:27:15 GMT
|
|
|
Post by johnfcbn44dx on Sept 3, 2021 12:22:18 GMT
|
|
|
Post by buster on Sept 3, 2021 12:49:22 GMT
they look great to me, all credit to you, I'd purchase a set for my 400 kicker in a flash
|
|
|
Post by CTB on Sept 3, 2021 21:43:45 GMT
Not sure iif this helps John
|
|
|
Post by johnfcbn44dx on Sept 4, 2021 14:20:05 GMT
Not sure iif this helps John That looks like the ZA stripe, but in other pictures the red one looked darker at the front I'm thinking all the UK ones maybe are ZA stripe, and it depends on the lighting angle. can't find an image of the ZB stripe. (and the posty has not come with my test prints yet ) Thanks
|
|
|
Post by johnfcbn44dx on Sept 4, 2021 14:28:03 GMT
I've taken the tank stripes a bit further based on Nicks old bike up for auction and some blue kicker pics....
|
|
|
Post by johnfcbn44dx on Sept 5, 2021 10:50:05 GMT
As far as I can take it, a few more pixels sorted, another test print now perhaps... (Quite happy to share these back up files with any member with more than 66 posts ).
|
|
|
Post by richard on Sept 5, 2021 19:53:35 GMT
As far as I can take it, a few more pixels sorted, another test print now perhaps... (Quite happy to share these back up files with any member with more than 66 posts ). hello
this post bring me up to 66..
thanks richard
|
|
|
Post by johnfcbn44dx on Sept 6, 2021 21:18:23 GMT
The test prints arrived... NOS Vs test print side panel stripe...files for SP & tail cowl stripes need a tiny tweek with light green on the upper blue... Side panel Emblem Minor error on the " A" but will still use it and amend the file, the red also needs darkened slightly for future prints... The tank stripe transition is very subtle on the test print, the red tank assm. is ZB, Still wondering what the ZB tank stripe looks like, anyway I think the ZA stripe will be ok as sorted above...the rear blue is fine... Not to much to amend. The vinyl is unbranded on the test prints, so I don't know the spec. but for the tank stripes I think I may go back to my local supplier for doing AKV-V's original tank. but otherwise OK.
|
|
|
Post by johnfcbn44dx on Sept 7, 2021 11:59:43 GMT
Fixed the side panel emblem detail..... - Top one as it should be on transparency
- Add background (fudge if white printing / printing on transparency not available / viable)
- White layer (print on transparency)
- Cut line template.
|
|