|
400N seat
Sept 12, 2021 15:32:43 GMT
via mobile
Post by spen on Sept 12, 2021 15:32:43 GMT
I’m going to need a new seat at some point as the steel has rusted out completely and the cover is damaged. Any recommendations where I can get one from? It’s a 400N 1980 ! Thanks in advance 👍
|
|
|
Post by The Great High Lord Beer on Sept 12, 2021 15:43:43 GMT
I have a seat at work, can't remember condition, I think the base is solid but not sure about the cover, I'll post a pic tomorrow, if it's any use you can have it 👍🍺
|
|
|
Post by spen on Sept 13, 2021 19:45:14 GMT
That would be awesome if the base is solid👍. Thanks so much Lord Beer 🙏
|
|
|
Post by The Great High Lord Beer on Sept 15, 2021 14:21:35 GMT
Hi Spen, apologies but I've just had a look at the seat and it's not good, if I recall I bought it for the tail piece only and wouldn't be happy even giving it away. Good luck with your quest 🍺
|
|
|
Post by johnfcbn44dx on Sept 15, 2021 14:45:26 GMT
Hi Spen, apologies but I've just had a look at the seat and it's not good, if I recall I bought it for the tail piece only and wouldn't be happy even giving it away. Good luck with your quest 🍺 The fittings and rubbers look quite good from what I can see, well worth keeping as spares? (That's the later seat....)
|
|
|
Post by andy1kenobe on Sept 15, 2021 16:29:55 GMT
What are the corners like? If they are ok, that's an easy repair.
|
|
|
Post by buster on Sept 15, 2021 17:39:02 GMT
What are the corners like? If they are ok, that's an easy repair. with you on that one, if the edges are decent thats a reasonably easy fix and well worth saving
|
|
|
Post by spen on Sept 15, 2021 19:38:24 GMT
Thanks for looking Buster, its not as bad as mine, but still too far gone for me to repair I think! It would probably cost more to repair and re - upholster than buying a new one. I think that i can get a new one from Wemoto for £166, so I think I'll go down that route. Thanks for your efforts though, really appreciate it
|
|
|
Post by duffer on Sept 16, 2021 16:07:04 GMT
LORD BEER 🍺 That seat is right up my street. May I be considered for thy generosity. I have a mig welder with a "kin tissue paper " setting 😁
|
|
|
Post by buster on Sept 16, 2021 19:20:16 GMT
Thanks for looking Buster, its not as bad as mine, but still too far gone for me to repair I think! It would probably cost more to repair and re - upholster than buying a new one. I think that i can get a new one from Wemoto for £166, so I think I'll go down that route. Thanks for your efforts though, really appreciate it I could probably sort you out a plastic seat a fair bit cheaper than that. I'll see if I can reach it at the weekend and pop a few pics up
|
|
|
Post by The Great High Lord Beer on Sept 16, 2021 19:38:30 GMT
Seat and a tail piece off to Sir Duffer so he may work his magic 🍻
|
|
|
400N seat
Sept 16, 2021 19:56:59 GMT
via mobile
Post by spen on Sept 16, 2021 19:56:59 GMT
Ok, thanks Buster. Top fella 👍
|
|
|
Post by duffer on Sept 17, 2021 10:22:28 GMT
Seat and a tail piece off to Sir Duffer so he may work his magic 🍻 Expect a new thread shortly on the trials and tribulations of welding a tissue.... 🤪
|
|
|
Post by comstar on Sept 17, 2021 14:30:12 GMT
Looking forward to it. Love your antics.
|
|
|
Post by buster on Sept 19, 2021 10:08:23 GMT
|
|