|
Post by BritPete on Jan 18, 2021 17:34:31 GMT
After painting the engine I need to paint the covers This will have been done many times before so The Silver needs rubbing down and shining up do I then roughly mask it up and then polish the edges of the paint off with wet and dry The Honda - do i spay over it and then rub off with wet and dry
|
|
|
Post by CTB on Jan 18, 2021 19:50:32 GMT
Yes, yes and yes imo
|
|
|
Post by terryc on Jan 18, 2021 20:15:27 GMT
When I did mine I masked of the silver bit Using frog tape (it goes round corners better than ordinary masking tape) sprayed over the " HONDA " then rubbed it down afterwards with wet and dry on a sanding block
|
|
|
Post by BritPete on Jan 18, 2021 20:33:20 GMT
Thanks Terry
How did you clean the made in Japan letters please
|
|
|
Post by terryc on Jan 18, 2021 21:03:09 GMT
They were painted black so just left them as they were I suppose all you can do there is scrape them out with a scriber of some kind
|
|